Documents published in Scipedia

• Field Site Characterization of a Coastal Aeolian Sandy Subgrade for a Proposed Tank Farm Site in Peru

  J. Zamora*, M. Pando

  ISC2024.

  
  

  Abstract

  Analysis of shallow foundations, pavements, and slabs-on-grade requires adequate site characterization of the nearsurface soils. Key properties required for the above are the soil stiffness and its nonlinearity. In this paper, we present the results of field site characterization at a coastal aeolian sand site located in Villa El Salvador, Peru, where large storage tanks are being proposed to be supported on concrete slabs-on-grade and shallow ring foundations. The site characterization included standard penetration tests (SPT), dynamic cone penetrometer (DCP) tests, lightweight deflectometer (LWD) testing, and geophysical tests such as multichannel analysis of surface waves (MASW), seismic refraction, and electrical resistivity. The paper focuses on estimating elastic soil stiffness (Es) values on the main bearing layer of the tanks. The observed large variability of Es estimates was associated with inherent soil variability at the site, the in-situ test method, and the use of empirical correlations between Es and different in-situ tests. Good elastic soil stiffness estimates for the bearing layer (Upper SP sand) were required to make reliable estimates of absolute and differential settlements for the tanks. Due to soil nonlinearity, the elastic stiffness values from the different methods decreased with increasing levels of shear strains associated with each test. Accordingly, the highest elastic stiffness values were from the MASW, followed by the LWD, and the lowest from SPT-based correlations. The soil stiffness estimates using SPT-based correlations yielded the highest variability due to the high uncertainty and low confidence of the empirical correlations between Es and SPT field values.

  Abstract
  Analysis of shallow foundations, pavements, and slabs-on-grade requires adequate site characterization of the nearsurface soils. Key properties required for the above are [...]

  • 13
  •  read

• Dynamic characterization of alluvial deposits through geophysical anda specialized test in Floridablanca santander

  C. Buenahora Ballesteros*, D. Galvis Ballesteros, N. Amaya Perez, A. Martínez, L. Ortiz, M. Silva

  ISC2024.

  
  

  Abstract

  The Metropolitan Area of Bucaramanga is located within one of the three seismic nests in the world and therefore presents a high seismic and geotechnical threat (INGEOMINAS, 2001), therefore certain zones, especially those with alluvial and colluvial deposits, have limitations for the development of infrastructure projects, unless a threat assessment is carried out that indicates otherwise or, in its absence, it is reduced to low levels with stabilization works. The thicknesses of these deposits vary from a few meters to two hundred meters and their definition and dynamic behavior (damping coefficient and terrain degradation curves), would allow analysis with special non-linear constitutive models to better understand their response to a possible earthquake and to ensure the stability of the structures and even an optimization based on a possible lower spectrum. A new two-tower housing project of up to 36 stories high is a perfect scenario to carry out a local seismic response study and perhaps transform the way future projects are designed. It should be noted that, given the acceptable stiffness and granular composition of the soils, it is difficult to take unaltered samples and the Colombian NSR-10 standard does not require local behavior studies and therefore its study has not been properly established. It is sought through geophysical tests and laboratory tests such as triaxial, resonant column and bender element to perform such characterization and to perform soil modeling that allows the calculation engineer to have the appropriate inputs for their analysis.

  Abstract
  The Metropolitan Area of Bucaramanga is located within one of the three seismic nests in the world and therefore presents a high seismic and geotechnical threat (INGEOMINAS, [...]

  • 0
  •  read

• Calculation of heights for local datum points of tide gauges in Albania referred to the average sea level and albageo program

  B. Sina*, G. Hasko, E. Blloshmi

  ISC2024.

  
  

  Abstract

  The accurate measurement and monitoring of sea levels are of paramount importance, especially for coastal regions like Albania, where sea level changes can have significant impacts on various aspects of life, including coastal infrastructure, ecosystems, and human settlements. This abstract provides an in-depth overview of a study focused on the calculation of heights of local datum points at tide gauges in Albania with reference to the average sea level, using the ALBAGEO3 program. Tide gauges play a crucial role in understanding the dynamic nature of sea levels. These instruments measure the height of the sea surface relative to a reference point, which is typically known as the local datum. The calculation of heights of local datum points is crucial for several reasons. Firstly, it provides insights into the relative sea level changes at different locations in Albania. It allows for the identification of areas that may be more vulnerable to such events, enabling betterinformed decision-making in terms of coastal management and disaster preparedness. Furthermore, accurate knowledge of local datum heights is essential for navigation and maritime activities. It ensures that nautical charts are up to date and that ships can safely navigate Albanian waters without the risk of running aground or encountering obstacles related to sea level changes. In summary, the study on the calculation of heights of local datum points at tide gauges in Albania, utilizing the ALBAGEO3 program, plays a pivotal role in advancing our understanding of sea level variations in this coastal nation. The accurate and reliable data generated through this research benefits not only the scientific community but also provides actionable insights for policymakers, urban planners, and other stakeholders involved in the sustainable development and protection of Albania's coastal areas.

  Abstract
  The accurate measurement and monitoring of sea levels are of paramount importance, especially for coastal regions like Albania, where sea level changes can have significant [...]

  • 20
  •  read

• Spatio-Temporal Prediction Surface Displacement in Urban Underground Excavation: A Case Study in Seville"

  M. Bahri*, E. Mascort-Albea, R. Romero, C. Soriano Cuesta, A. Jaramillo Morilla

  ISC2024.

  
  

  Abstract

  One of the primary challenges in excavating underground in urban areas is controlling and mitigating ground surface displacement caused by Earth Pressure Balance (EPB) tunneling. It is crucial to avoid damaging historical monuments and buildings in these areas. This paper presents a new method for predicting the surface displacement caused by EPB in Seville. A spatiotemporal dataset was generated for this study using numerical simulation in FLAC3D. The simulation replicates the excavation process of the Seville metro line in real-time, and records the surface displacements at selected points in the dataset. The last 20-time steps of excavation are predicted, and the first 80-time steps are chosen for training and tuning hyperparameters, as the dataset is spatiotemporal. A recurrent neural network (RNN) is used to detect and predict patterns between surface displacement and input features at different time steps and locations of the excavation. After fine-tuning the RNN, the model achieved an accuracy of 0.91 for the evaluated R-squared (R2), indicating its practicality for real-time prediction of surface displacement in underground excavations in Seville. The model's performance can be further improved with a larger data range. By deploying it as a hazard detector, the model can issue a warning if the ground displacement exceeds the limit, thereby preventing potential hazards. This approach can help control and mitigate potential hazards in underground excavations in historical cities.

  Abstract
  One of the primary challenges in excavating underground in urban areas is controlling and mitigating ground surface displacement caused by Earth Pressure Balance (EPB) tunneling. [...]

  • 68
  •  read

• Geotechnical monitoring at the speed of light: New insights from distributed acoustic sensing

  S. Ouellet*, J. Dettmer, M. Lato, R. Crickmore, B. Dashwood, J. Chambers, A. Chavarria

  ISC2024.

  
  

  Abstract

  Recent advances in distributed fibre optic sensing enable new opportunities in geotechnical monitoring and characterization. Distributed acoustic sensing (DAS) is a distributed fibre optic sensing technology relying on Rayleigh backscattering of light to detect and locate disturbances in near real-time along tens of kilometres of fibre optic cable. The dynamic strain sensing capabilities of DAS have prompted numerous research initiatives from the seismology community over the past decade. Although research on DAS for seismic applications is well established, studies on DAS for geotechnical monitoring applications are less common. Here, we present a summary of two recent case studies involving DAS for geotechnical monitoring. The first study considers a slow-moving landslide where DAS data were acquired over a three-day period of rainfall. The DAS aseismic strain and strain-rate data support the interpretation of the triggering and retrogression failure mechanism of the landslide. The second study considers an active mine site in northern Canada. Data were acquired from a cable installed ~1m below a tailings dam crest. Passive seismic interferometry was applied to DAS data to infer changes in seismic velocities in the uppermost several meters of the subsurface. These findings represent a first step towards advancing continuous monitoring techniques with fiber optic sensing technologies. However, further research is needed to improve our understanding of DAS performance for geotechnical monitoring applications over longer-term periods.

  Abstract
  Recent advances in distributed fibre optic sensing enable new opportunities in geotechnical monitoring and characterization. Distributed acoustic sensing (DAS) is a distributed [...]

  • 32
  •  read

• Effects of storage time on sample quality in Ballina clay

  K. Ouyang, J. Pineda*

  ISC2024.

  
  

  Abstract

  This paper explores the effects of the storage time on the engineering properties of Ballina clay, an estuarine silty clay that represents the soft soil deposits encountered along the eastern and southern Australian coastlines, which serves as foundation material for most of the country’s transport and energy infrastructure. An experimental program was carried out to evaluate the variation in soil compressibility and soil shear strength for tube specimens retrieved with an open sampler (Shelby tube) as well as an Osterberg fixed-piston sampler. Mechanical parameters obtained from tests performed immediately after sampling are compared against those measured over a period of 1 year, to assess the influence of the storage time. Results indicate that long-term storage has small influence on the quality of Ballina clay specimens in comparison with the mechanical disturbance caused during tube penetration and extraction, which is controlled by the sampler type.

  Abstract
  This paper explores the effects of the storage time on the engineering properties of Ballina clay, an estuarine silty clay that represents the soft soil deposits encountered [...]

  • 5
  •  read

• Relief well identification from satelite imagery using dual kernel filter unets

  L. Zhang*, J. Tom, Z. Nick

  ISC2024.

  
  

  Abstract

  Precise identification of levee relief well locations from satellite imagery can be challenging and time-consuming. In this research, we propose a novel approach utilizing a U-Net architecture to identify relief wells along flood control levees, as a proof of concept of combining freely available imagery with machine learning techniques. The goal of this research is to develop techniques to make infrastructure asset management more efficient by automating the process. Our study highlights the crucial role of the convolution kernel size in the U-Net architecture, which significantly influences the accuracy of the results. Larger convolution kernel sizes excel in capturing extensive contextual information from the input image, potentially leading to superior outcomes. However, training with larger kernels is computationally intensive. Conversely, smaller convolution kernel sizes excel in capturing local features. To strike a balance these considerations, we introduce a Dual Kernel Filter U-Net, which combines two U-Nets with distinct convolution kernel sizes, 3x3 and 11x11. This innovative approach aims to harness the strengths of both convolution kernel sizes to improve accuracy and overall performance. The proposed Dual kernel filter U-Net was trained and evaluated on a real dataset of relief wells from Google Earth imagery. Our evaluation results demonstrate that this model achieves an accuracy rate of 99.76% with training dataset 2626 satellite images. Notably, this significant accuracy enhancement is achieved without substantially increasing computational time, making it a promising advancement in satellite image analysis for object location identification and asset, and disaster management

  Abstract
  Precise identification of levee relief well locations from satellite imagery can be challenging and time-consuming. In this research, we propose a novel approach utilizing [...]

  • 4
  •  read

• Prediction of Future Settlement of Backfill at an Aggregate Mining Quarry Site in Irwindale, CA Using Numerical Method and Settlement Monitoring Data

  A. Shafiee, C. Pappo*, M. Kamalzare

  ISC2024.

  
  

  Abstract

  Future static settlement of a former aggregate mining quarry site in Irwindale, California is predicted based on the monitoring data and using numerical analyses that consider the total settlement of the deepest portion of the rockfill. The portion of quarry analyzed was backfilled with approximately 61 to 67 meters, has a volume of 2.6 million m3, and covers an area of 114,900 m2. The backfill material ranges from silty sand (SM) to silty gravel (GM) and was compacted to achieve an average relative compaction (RC) of 96%. The deepest fill area is currently being monitored with survey data to predict future 50-year settlement due to secondary compression. Settlement monument data from three different locations has been collected and made available starting from May 2009 up to now. A 3-dimensional model of the rockfill was used to determine an appropriate upper and lower bound of predicted future 50-year settlement from today in 13 stages and scenarios. The modified secondary compression index was estimated along with the modified compression index that was back calculated to match the field monitoring data. We could find good agreement between the field monitoring data and our numerical model when considering total settlement of the rockfill.

  Abstract
  Future static settlement of a former aggregate mining quarry site in Irwindale, California is predicted based on the monitoring data and using numerical analyses that consider [...]

  • 19
  •  read

• How to get a good match for consolidation coefficient

  S. Peña Fernández, R. Gómez Escoubès*

  ISC2024.

  
  

  Abstract

  It is difficult to get accurate magnitudes when dealing with consolidation coefficient, decisive when clays and clayey silts, are compressing, especially if secondary consolidation is in play. This is a typical condition in harbours when new areas are to be reclaimed to get more and more loading/unloading areas. There are several approaches to assess consolidation rate. The oedometer cell is the main lab test used to get the compressibility parameters. It is accepted that 24 hours is a good time for each pressure. However, some soils consolidate slowly, and they need more time. Especially when slope is far from horizontal. On the other hand, “true” consolidation coefficient is obtained when surpassing the preconsolidation pressure. Thus, values obtained below preconsolidation pressure are usually discarded. Horizontal coefficient of consolidation can be assessed with dissipation tests from piezocones. If piezometers are installed within the consolidating layer, comparing with the theoretical isochrones we may derive the “true” consolidation coefficient. If settlements are measured, a comparison with theoretical ones can be informed on the predominant consolidation phenomenon. Much care is to be applied and not misunderstand the process in play. Dissipation tests give way to much higher consolidation values than laboratory tests. This could be due to anisotropic effects, but the main reason is that dissipation occurs in a reloading process, while oedometer tests are in primary consolidation, at least from the preconsolidation pressure and on. This paper shows some ideas to properly assess the process involving consolidation.

  Abstract
  It is difficult to get accurate magnitudes when dealing with consolidation coefficient, decisive when clays and clayey silts, are compressing, especially if secondary consolidation [...]

  • 0
  •  read

• Site Characterization of a Restored Coastal Dune and Beach

  B. Harris*, J. Hubler, J. Shawler, N. Stark, P. Tereszkiewics, J. Moore, W. Caldwell, L. Provost

  ISC2024.

  
  

  Abstract

  Coastal beach and dune ecosystems are critically important for shoreline protection and significant resources have been allocated to their conservation. Dune vegetation is known to modify site response to wind, waves, and storms, but little focus has been given to understanding how belowground sediment structures enhance dune stability. A first step in addressing this knowledge gap is to determine optimal methods to measure subsurface sediment properties in onshore sandy environments. Our team performed a comparison of geotechnical and geophysical methods on a restored beach and dune system on Florida’s Atlantic coast. Methods included two types of dynamic cone penetrometer (DCP) systems, a multi-channel analysis of surface wave (MASW) system, a ground penetrating radar (GPR), soil vibracores, and grain size analyses. Two transects were investigated, a 50-meter cross-shore transect and an intersecting 20-meter along-shore transect. The transects were selected to study the gradient of sediment properties from the swash zone to the high dune. Key findings from this study were that the PANDA DCP provided a higher resolution of measurements compared to the standard DCP, which is extremely advantageous in the shallower, less consolidated soils. MASW shear wave velocity results showed similar trends to the DCP cone tip resistance and allowed for measurement of stiffer soils where the DCP reached refusal. In addition, the results from the DCP, GPR and vibracores compared well. Thus, the use of the DCP and GPR systems as minimally intrusive testing options in fragile dune systems was verified.

  Abstract
  Coastal beach and dune ecosystems are critically important for shoreline protection and significant resources have been allocated to their conservation. Dune vegetation is [...]

  • 100
  •  read