m (Scipediacontent moved page Draft Content 249663902 to Lansink-Rotgerink et al 2020a) |
|||
| Line 2: | Line 2: | ||
== Abstract == | == Abstract == | ||
| − | Replacement of protruding antennas by integrated alternatives will reduce the energy consumption and | + | Replacement of protruding antennas by integrated alternatives will reduce the energy consumption and <math>NO_x</math> and <math>CO_2</math> emissions of an aircraft. This paper proposes and integrated VHF cavity backed slot antenna that is suitable to replace blade antennas. To reduce the size of the cavity a parallel plate resonator is used. The slot is integrated into a fibre metal laminate fuselage panel. A bookleafing principle is used to reinforce the panel at the position of the slot, making sure the material quality is not reduced. Measurement results of a demonstrator antenna show the feasibility of the proposed antenna. Moreover, the paper discusses several electromagnetic and structural design trade-offs for this integrated antenna. |
== Full document == | == Full document == | ||
Replacement of protruding antennas by integrated alternatives will reduce the energy consumption and Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://mathoid.scipedia.com/localhost/v1/":): NO_x
and Failed to parse (MathML with SVG or PNG fallback (recommended for modern browsers and accessibility tools): Invalid response ("Math extension cannot connect to Restbase.") from server "https://mathoid.scipedia.com/localhost/v1/":): CO_2
emissions of an aircraft. This paper proposes and integrated VHF cavity backed slot antenna that is suitable to replace blade antennas. To reduce the size of the cavity a parallel plate resonator is used. The slot is integrated into a fibre metal laminate fuselage panel. A bookleafing principle is used to reinforce the panel at the position of the slot, making sure the material quality is not reduced. Measurement results of a demonstrator antenna show the feasibility of the proposed antenna. Moreover, the paper discusses several electromagnetic and structural design trade-offs for this integrated antenna.
[1] D. Sievenpiper, L. Zhang, R.F. Jimenez Broas, N.G. Alexópolous, E. Yablonovitch, “High-impedance electromagnetic surfaces with a forbidden frequency band”, IEEE Trans. on Antennas and Prop. (1999), 47 (11): 2059-2074.
[2] J. Joubert, J.C. Vardaxoglou, W.G. Whittow and J.W. Odendaal, “CPW-fed cavity-backed slot radiator loaded with an AMC reflector”, IEEE Trans. on Antennas and Prop. (2012), 60 (2): 735-742.
[3] H. Malekpoor and S. Jam, “Improved radiation performance of low profile printed slot antenna using wideband planar AMC surface”, IEEE Trans. on Antennas and Prop. (2016), 64 (11): 4626-4638.
[4] J. Li, H. Shi and A. Zhang, “Unidirectional circularly polarized slot antenna backed with miniaturized AMC reflector”, IEEE Int. Symp. on Antennas and Prop. & USNC/URSINat. Radio Sc. Meeting, Boston, MA, USA, July 2018.
[5] W. Hong and K. Sarabandi, “Platform embedded slot antenna backed by shielded parallel plate resonator”, IEEE Trans. on Antennas and Prop. (2010), 58 (9): 2850-2857.
[6] N. Behdad and K. Sarabandi, “A wide-band slot antenna design employing a fictitious short circuit concept”, IEEE Trans. on Antennas and Prop. (2005), 53 (1): 475-482.
Published on 15/02/21
Accepted on 10/02/21
Submitted on 10/02/21
DOI: 10.23967/emus.2020.001
Licence: CC BY-NC-SA license
Are you one of the authors of this document?