Research on the Mechanical Characteristics and Structural Optimization of HighPressure Diaphragm Compressors in Hydrogen Refueling Stations under Service Conditions


== Abstract ==

<p>To enhance the fatigue life and service safety of the diaphragm in high-pressure diaphragm compressors, this study investigated the realworld operating conditions of hydrogen refueling station diaphragm compressors. A refined finite element model of the gas cavity cover plate&ndash;diaphragm&ndash;oil cavity support plate assembly was established using Abaqus software. Static structural analysis, thermo-structural coupling analysis, and modal analysis were conducted to examine the stress distribution of the diaphragm assembly under extreme working conditions, the influence of bolt preload on the modal characteristics of the compressor, and the effect of diaphragm thickness on stress distribution and fatigue life. The research results indicate that air holes/passages and oil holes/passages significantly affect the stress distribution of the diaphragm. The high-stress areas of the diaphragm are mainly concentrated in the transition zone of the chamber and the overlapping area between the diaphragm and the air/oil passages. The temperature inside the diaphragm compressor&rsquo;s membrane chamber significantly affects the stress level of the diaphragm. When the chamber temperature reaches 245&deg;C, the maximum equivalent stress of the diaphragm reaches 1079 MPa. As the preload increases, the modal frequencies generally rise, with higher-order modes showing greater sensitivity to preload variations. Considering the stress level, fatigue life, and deflection performance of each diaphragm, the diaphragm thickness should be designed to be 0.4 mm. The finite element simulation model and research results proposed in this paper can provide a reference for the design improvement and selection of cavity types and diaphragms of diaphragm compressors in hydrogen refueling stations, as well as for the online health monitoring of hydrogen refueling stations.OPEN ACCESS Received: 31/07/2025 Accepted: 09/09/2025</p>



== Document ==
<pdf>Media:Draft_Sanchez Pinedo_281894935-8744-document.pdf</pdf>