RCS Simulation of Double S-Shaped Inlet with Radar Absorbing Materials Shedding Using Iterative Physical Optics with Impedance Boundary Condition


== Abstract ==

<p>The inlet of an aircraft engine is a primary contributor to the aircraft&rsquo;s forward electromagnetic scattering. S-shaped inlet and radar absorbing materials (RAM) coatings have been widely adopted as effective measures to reduce forward radar cross section (RCS). To investigate the influence of RAM shedding on the RCS reduction efficiency, the electromagnetic scattering characteristics of the inlet under five different shedding probabilities were calculated using the iterative physical optics (IPO) combined with impedance boundary condition (IBC). Numerical simulation results demonstrate that the forward RCS of the S-shaped inlets increases monotonically with shedding probability. In the yaw plane, intact non-magnetic RAM exhibits better RCS reduction efficiency (RRE) than that in the pitch plane across all scenarios. Specifically, at a shedding probability of 0.7, the remaining non-magnetic RAM maintains an RRE exceeding 40% in the pitch plane. Collectively, these results suggest that recoating the nonmagnetic RAM is recommended when the shedding probability exceeds 0.7 in either detection plane to sustain critical stealth performance.OPEN ACCESS Received: 20/05/2025 Accepted: 13/08/2025 Published: 27/10/2025</p>



== Document ==
<pdf>Media:Draft_Sanchez Pinedo_217854527-3320-document.pdf</pdf>